Configuration：
Material：Nickel Slag
Capacity: 45-60TPH
Input Moisture: ≤15%
Output Moisture: ≤1%
Output size：≥4200cm2/g
On-site overview：
1200TPD Nickel Slag Vertical Mill in Shenyang
Configuration is to perform the best layout scheme according to the site investigation and client's specific requirements. Since the customer put into production, the equipment has been running steadily, and the maintenance is easy and simple.
Introduction of the site
The output of nickel slag vertical mill produced by Yusheng Machinery can reach 185 t/h, and the fineness of finished product can reach 480-500 m2/kg. The overall power consumption is less than 37kWh/t, which can meet the project of nickel slag production line with an annual output of 20-1.5 million tons, and has the advantages of low energy consumption and short supply cycle.
1. The specific surface area of nickel slag powder can reach 480-500 m2/kg, so that the activity of nickel slag can be utilized to a great extent.
The material residence time in the inside of vertical mill is short, it is easy to detect and control the product particle size and chemical composition, and reduce repeated milling. The specific surface area of ground nickel slag powder can reach 480-500m2 / kg, and the product quality is stable.
2. Low energy consumption, low noise, energy saving and environmental protection.
The energy consumption of nickel slag vertical mill can be reduced by 30% compared with the ordinary ball mill, and the noise is low. The vertical mill equipment adopts an internal negative pressure system, which effectively reduces the dust spillover and responds to the national policy call for energy saving and emission reduction.
3. Perfect loading system.
The design of spring loading system buffer of liquid-gas combination of the nickel slag vertical mill makes there is no metal contact between the roller grinding parts in the whole operation process of vertical mill.
